Cmnd & Play; Custom App - Philips Q Line 32BDL3650Q User Manual

32BDL3650Q
5.7. CMND & Play
1) Server
Setup CMND & Play server address
2) Account
Setup CMND & Play account
3) PIN Code
Setup CMND & Play PIN code
(4) Version
There are two options, Ver.2 and Ver.3
Ver. 2
use 2.0/2.2 agreement
Ver. 3
use 3.0/3.1 agreement
(5) Content
There are 3 options available: internal storage, SD card
and USB storage.
If Ver.2, is selected, Server/Account/PIN code will be
shown in gray and cannot be set.
5.8.

Custom App

User can set up the application for Customer Source
5.8.1. OSD Menu operation:
RCU: Source -> Custom
If you set up customer APK, the customer App will be
launched when switching source to customer mode.
If customer APK is not set, the system shows a black screen
when switching source to customer mode.
Custom App
Select App
5.8.2. Configure custom source
Access Android settings -> Signage Display -> Source settings
-> Custom App
5.8.3. Select app
Save
Select the App, click the "Save" button to perform save
function.
Forget
Press "Forget" button to remove previously stored
information.
Cancel
Press "Cancel" button to quit without saving changes made.
If no customer APK is installed, the list will be blank, and the
"Save" and "Forget" buttons will be grayed out.
Custom App
Select App
Select App
FORGET
If customer APK is installed, user can select it from the list.
• Case 1: Not setting Custom App.
Custom App will display and the focus is on the first item
automatically.
40
CANCEL SAVE