Siemens CM776G1.1 User Manual And Installation Instructions page 18

Table of Contents

Advertisement

en Ventilation function "Crisp Finish"
11.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 17
Press the operating mode that you require.
1.
Implement the settings for the operating mode, e.g.
2.
type of heating and temperature.
Press "Added microwave"
3.
Press the required microwave output setting.
4.
5.
Press "Cooking time" and set the cooking time.
12  Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your meal
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
¡ Top/bottom heating
¡ Pizza setting 
¡ Circulated air grilling 
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
Set a suitable type of heating and a temperature.
1.
13  Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
13.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
18
⁠ .
extracts mois-
Use
to start the operation.
6.
a The appliance starts to heat and the time counts
down.
a Once the cooking time has elapsed, a signal tone
sounds. A notification appears on the display con-
firming that the operation has finished.
Once the cooking time has elapsed:
7.
If required, you can select other settings and re-
start the operation.
When the food is ready, use
pliance off.
Changing added microwave
You can change or deactivate the added microwave at
any time.
Press the microwave output setting.
1.
Change or deactivate the microwave output setting.
2.
Press "Apply".
3.
If required, you can select other settings and com-
bine with the ventilation function.
Press "Crisp Finish".
2.
a "On" is in the tile.
Press
to start the operation.
3.
a The appliance starts heating.
a The setting values are shown on the display.
When the food is ready, use
4.
ance off.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
Press "Crisp Finish"
a For "Crisp Finish"
a The operation continues without the ventilation func-
tion.
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 16
13.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
to switch the ap-
to switch the appli-
⁠ .
, "Off" appears on the display.

Advertisement

Table of Contents
loading

Table of Contents