NEC MultiSync X463UN User Manual page 38

Alert error message list
Error number
Alert mail Message
* ErrorCode
The monitor's power supply is not
70h ~ 7Fh
functioning normally.
80h ~ Fh The cooling fan has stopped.
The monitor's back light unit is not
90h ~ 9Fh
functioning normally.
A0h ~ AFh The monitor is overheated.
A2h
The monitor doesn't have the input
B0h ~ BFh
signal.
The monitor caused the problem of the
C0h ~ CFh
abnormal of option board.
Sample: The following examples are content of Alert Mail that informs the temperature anomaly of monitor.
Sample: The following examples are content of test mail by browser.
Explanation
Standby power Abnormal
Cooling fan Abnormal
Backlight abnormal
Temperature Abnormal
SENSOR reached at the temperature
that the user had specifi ed.
*condition: DISPLAY PROTECTION-FAN
CONTROL-COOLING FAN = AUTO
No signal
Option board abnormal
English-36
Measure
Please contact your supplier.
Please contact your supplier.
Please contact your supplier.
Please contact your supplier.
Reconfi rm the setting condition from
OSD (DISPLAY PROTECTION-FAN
CONTROL) or please contact your
supplier.
Please check "No picture" in
"Troubleshooting".
Please contact your supplier.