NEC M46B-AVT User Manual page 42

Using the LCD with RS-232C
To control monitor or multiple monitors that are daisy-chained together please use
the control command. Instructions for the control command can be found on the CD
included with the display. The file is called "External_control.pdf ".
1) Interface
PROTOCOL
BAUD RATE
DATA LENGTH
PARITY BIT
STOP BIT
FLOW CONTROL
2) Control command diagram
Please see file "External_Control.pdf " on the CD-ROM.
RS-232C
9600
[bps]
8 [bits]
NONE
1 [bit]
NONE
- continued
English-38