Expansion Slots - Biostar Hi-Fi Z97Z5 Setup Manual

Memory Capacity
DIMM Socket
Location
DDR3_A1
DDR3_A2
DDR3_B1
DDR3_B2
Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Enabled
Enabled
Enabled
(O means memory installed, X means memory not installed.)
Note: When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.

2.5 Expansion Slots

Install an Expansion Card
You can install your expansion card by following steps:
1. Read the related expansion card's instruction document before install the
expansion card into the computer.
2. Remove your computer's chassis cover, screws and slot bracket from the
computer.
3. Place a card in the expansion slot and press down on the card until it is
completely seated in the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. Replace your computer's chassis cover.
6. Power on the computer, if necessary, change BIOS settings for the
expansion card.
7. Install related driver for the expansion card.
Hi-Fi Z97Z5/Hi-Fi Z97Z5+/Hi-Fi B85Z5/Hi-Fi B85Z5+
DDR3 Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
DDR3_A1 DDR3_A2
O X
X O
O O
Total Memory Size
Max is 32GB.
DDR3_B1 DDR3_B2
O X
X O
O O
11