SATA Controller(s)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Mode Selection
This item determines how SATA controller(s) operate.
Options: AHCI (Default) / RAID
SMART Self Test
This item runs SMART Self Test on all HDDs during POST.
Options: Disabled (Default) / Enabled
SATA Express 1L/1U SRIS
This item sets SATA Express SRIS.
Options: Auto (Default) / Disabled / Enabled
Network Stack
Network Stack
This item enables or disables UEFI network stack
Options: Disabled (Default) / Enabled
Note
»
The following items appear only when you set the Network Stack function to [Enabled]
IPv4 PXE Support
This item enables or disables IPv4 PXE Boot Support. If disabled IPv4 booth option will not be
created.
Options: Enabled (Default) / Disabled
IPv6 PXE Support
This item enables or disables IPv6 PXE Boot Support. If disabled IPv6 booth option will not be
created.
Options: Enabled (Default) / Disabled
GAMING Z170W
2. Advanced Menu | 13