Table of Contents
Advertisement
User's Manual
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor's power.
Power Indicator:
Bule
— Power On mode.
Amber — Power Saving mode.
[1]:
Turn the OSD menu.
Adjust ▼ ▲:
1. Adjust Signal Source and Audio Volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
[2] Button: 《Analog Input Models》
1. The OSD menu is used as《confirmation》function during start-up.
2. The「Auto adjustment」function works only for VGA input. (The auto adjustment function is used
to optimize the「horizontal position」,「vertical position」.)
3. Turn the OSD menu off or return to the previous menu.
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
14
Advertisement
Table of Contents
