Front Panel Control - HANNspree HP225HFB User Manual

FRONT PANEL CONTROL

Power Button:

Press this button to switch ON/OFF of monitor's power.
Power Indicator:

Blue — Power On mode.
Red — Power Saving mode.
MENU / ENTER:

Turn the OSD menu on or used as《confirmation》function during start-up .
Adjust ▲▼:

1. Adjust Contrast and Brightness change when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
【 A 】Button: 《For VGA input》

1. The OSD menu return to the previous menu.
2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is
used to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
【 A 】Button: 《Digital Input Models》

1. Press【 A 】to enter Source selections. (Selections include HDMI, etc. The actual selections
may very depending on the models. This function is only available in models with digital
inputs)
2. The OSD menu is used as《confirmation》function during start-up.
3. Press and hold this button more than 3 seconds will start 「Auto Adjust」 function when using
VGA input only. (The auto adjustment function is used to optimize the 「horizontal position」,
「vertical position」,「clock」,and 「phase」.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or electric heaters, or in

a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have

to ship your monitor.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be

removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
13
User's Manual