Troubleshooting - Toshiba BDX4300KB Owner's Manual

8 Troubleshooting

If you experience any of the following difficulties while using this unit, check the list below
before consulting your nearest TOSHIBA dealer.
Problem
No reaction to the
remote control.
No video signal on the
display device.
Incorrect or no audio /
video signal on the
amplifier/display device
via HDMI cable.
No high-definition video
signal on the TV.
No audio signal from the
loudspeakers of the
audio system.
No 3D effectiveness
Cannot play back a disc.
26
Tip
Connect the product to the power outlet.
Point the remote control at the product.
Insert the battery correctly.
Insert new battery in the remote control.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution.
Set TV System of TV correctly.
If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.
Ensure the amplifier/display devices setting match the Blu-ray
Disc™ player.
Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
Does the TV support high-definition video? High-definition video
is not available when the TV does not support it.
Turn on the audio system.
Set the audio system to the correct external input.
Increase the volume level of the audio system.
Set HDMI 3D to Auto.
Connecting by HDMI cable.
Connecting to a 3D TV.
Playback a 3D disc.
Wear 3D glasses.
Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean the disc.