Toshiba BDX4300KB Owner's Manual page 20

3. Select a rating level, then press OK.
System
Language
Select level:
Playback
Security
Network
Off
Items Description
KID SAFE Safe for kids
G All children and general guidance
PG Parental guidance
PG-13 Parental guidance for children under 13
PGR Parental guidance Recommended
R Restricted viewing
NC-17 No one 17 and under allowed
ADULT Adult only
Notes:
- Rated discs above the level you set in [Parental
Control] require a password to be entered.
- The ratings are country dependent. To allow
all discs to play, select 'Off'.
[Network]
System
Language
Playback
Security
Network
Move cursor key to select menu option
then use "OK " key to select
To enjoy BD-Live™ bonus contents,
Media Server Search and External
Control, set up the network connection.
Connect to network with Ethernet
1. Connect the Blu-ray Disc™ player to
the broadband modem or router.
2. In the Setup menu, select [Network],
then press .
3. Select [Interface] in the menu, then
press OK to select [Ethernet].
4. Select [IP Setting] in the menu, then
press OK to select [Auto]. An IP address
is obtained automatically.
If no IP address is obtained, select
[Manual] to input IP Address, Subnet
Mask, Default Gateway, DNS1/DNS2
and press OK to re-connect again to the
network. It will try to obtain the IP
address again.
5. Press RETURN or press OK to exit.
Notes:
- Ensure that the network cable is properly
connected and the router is switched on.
20
General Setting
Screen Save Off
Parental Control
Disc Auto Playback On
Off
CEC On
[1] KID SAFE
Disc Auto Upgrade On
[2] G
Load Default More...
RETURN Return
General Setting
Interface
Wireless Setting
IP Setting
Connection Test
Information
SETUP Exit
- During [Manual] mode, if the number is entered
incorrectly, press  to erase the number.
- A contract with the provider is needed to connect to
the Internet.
- This player does not support automatic detection of
cross-cables. Use the straight (standard) LAN cable.
- Loading BD-Live™ content from the internet may
take some time, depending on the file size and the
speed of the internet connection. To enjoy BD-Live
bonus content, you need to connect 1GB or larger USB
flash drive.
Connect to network with Wireless
1. In the Setup menu, select [Network], then
press .
2. Select [Interface] in the menu, then press OK
to select [Wireless].
3. A message will pop up on the screen, select
"Yes" to continue.
4. Select [Scan] or [Manual] or [Auto].
5. Then select "Next" and press OK to continue.
[Scan]
Select [Scan] in the menu, the Blu-ray Disc
player will start scanning and provide a list of
available network in your area. Select your
network ID and then press OK twice, the
alphanumeric keys will appear for you to
input your password. If your network does
not required password, press OK once.
[Manual]
If you know the details information of a
network, you can choose this way to connect a
wireless network. First, enter the ID of the
network (SSID), then select the encryption
type of WPS and lastly enter the password.
Press OK to call out the alphanumeric keys
on the screen for your entries. Then you can
connect the Blu-ray Disc
network.
[Auto]
The Blu-ray Disc player will try to connect
TM
automatically to a wireless network.
PBC (Push Button Configuration):
1. Turn on the router, set it to WPS, then press
WPS button if it has it.
2. Switch on the Blu-ray Disc
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PBC -> Next.
3. Press SETUP to exit.
PIN (Personal Information Number):
1. Turn on the router.
2. Switch on the Blu-ray Disc
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PIN.
TM
TM
player to the
TM
player and
TM
player and
TM