Headers & Connectors - Biostar Z270GT6 Manual

LN2_SW1: LN2 Mode Switch
When the LN2 mode is ON, the CPU will run at its lowest frequency (e.g., 800MHz) to avoid
unexpected system shutdown.
Note
» We are not responsible for the damages or risks caused by overclocking.
2.7 Headers & Connectors
MINI-SAS1: U.2 Connector
• The U.2 connector supports PCIe 3.0 x4 NVM express storage.
• Support Intel® Rapid Storage Technology & Intel® Optane Technology.
Note
» When U.2 is occupied, the SATA3_4U/4L connector will be disabled.
OFF (Default)
ON
Chapter 2: Hardware installation | 15
Z270GT6