Connect Usb Device; Connect Power; Preparation; Prepare The Remote Control - Toshiba BDX3300KB Owner's Manual

Connect USB device

A USB flash drive provides an additional
memory to software upgrade and enjoy
BD-Live bonus content.
TM
You can also enjoy playing back MP3/
JPEG/MPEG4 files stored in the USB flash
drive.
1. Connect the USB flash drive to the USB
jack on this product.
Notes:
- To enjoy BD-Live™ bonus content, as your
local storage, use a 1 GB or larger USB
flash drive.
- For some Blu-ray
TM
you may need to plug in the USB flash drive
before loading the disc. Otherwise, the disc may
not playback.
- TOSHIBA does not guarantee 100%
compatibility with all USB flash drives.

Connect Power

1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
– Before connecting the AC power cord, ensure
you have completed all other connections.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
– The type plate is located on the back of the unit.
10
discs with BD-Live feature,
TM

4 Preparation

Always follow the instructions in this chapter
in sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.

Prepare the remote control

1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long time, remove the battery.
- Risk of explosion! Keep battery away from
heat, sunshine or fire. Never discard battery in
fire.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
7 m 10 m 7 m
7 m 10 m 7 m