Toshiba 42RV635DB Owner's Manual page 45

Questions and
Q
Why are the colours wrong when an NTSC
source is played?
A
Connect the source via a SCART lead and play.
Select Manual Settings from the SETUP menu.
Manual Settings
Man
Colour System: Auto
ual
Setti
EXT2 A
Set the Colour to Auto and exit.
1
Go to the Picture settings menu and adjust
2
the tint.
Q Q
Why can popping noises be heard or
Why is there no digital text service?
blocks appear on the screen?
A
This is usually due to poor signal reception. Check
the aerial/antenna connections and that the aerial
has not moved direction. An aerial/antenna upgrade may
be required in order to receive all available services.
Q
Why is there a square shaped picture on
the widescreen television?
A
Some television programmes are transmitted in 4:3,
in particular older programmes. Turning Autoformat
off will stop the television showing native picture sizes.
Q
Why can television channels be seen in the
dark background areas when playing DVDs?
A
This is usually due to poor connection leads
(scart/HDMI) being used. Check all connections.
Q
Why are there vertical stripes on the screen
in PC mode?
A
The Sampling clock may need adjustment. Select
PC Setting from the SET UP menu, highlight
Sampling clock and adjust until the lines clear.
Q
Why are there horizontal stripes and/or
blurred images on the screen in PC mode?
A
The Clock phase may need adjustment. Select
PC Setting from the SET UP menu, highlight Clock
phase and adjust until the picture clears.
Answers
Q
Why is there a good media picture but no
sound?
A
Check all lead connections.
Q Q
Why is there no sound when the PC is
Why is there no digital text service?
connected?
A
Check all leads and connections.
Note: No sound is output from a DVI connection (if
using a DVI to HDMI lead). The audio input connection
must also be used.
Q
Why is the soundtrack in English when a
different audio language has been selected?
A
The programme is currently being broadcast with an
English soundtrack only.
Q
Why is there incorrect or no sound when in
DTV mode?
A
Press
been selected.
Q
Why when digital subtitles have been
selected are they not showing on screen?
A
Subtitles are not currently being transmitted by the
broadcaster.
Q
Why is Digital Audio output for?
A
This is a superior connection for connecting to an
audio sound system and allows transmission of
multichannel sound.
Q
Why is the digital channel locked?
A
The channel has been locked in Channel Options
(see 'Digital Settings' section).
Q
Why are some of the digital subscription
channels unavailable?
A
Your subscription needs upgrading. Contact your
service provider.
45
(continued)
to check if another audio track has
I/II
O