Table of Contents
Advertisement
DTV
NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.
Auto Tuning
Auto tuning will completely re-tune the television and can
be used to up date the channel list.
It is recommended that DTV Auto tuning is run
periodically to ensure that new services are added.
All current programmes and settings, i.e. favourites and
locked programmes, will be lost.
Press MENU and use
1
If available use
e
then
or
to select Antenna or Cable.
z
x
Use
to highlight Auto Tuning. Press OK.
e
2
SETUP
Menu Language
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
A screen will appear warning that previous
digital channels and settings will be deleted.
Auto Tuning
Previous settings will be lost! Press EXIT for
no change.
Tuning Mode
Use
or
to select DTV then press
z
x
3
Start Scan, press OK to start Auto tuning.
The television will start to search for all available
DTV stations.
You must allow the television to complete
the search.
When the search is complete the Auto Tuning
screen will display the services found.
Use
or
to move through the list to select a
e
f
4
channel then press OK to view.
auto tuning, manual tuning,
manual tuning for
or
to select SETUP.
z
x
to highlight Ant/Cable In and
English
UK
Antenna
DTV and ATV
Start Scan
to select
e
DVB-C
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
Select DTV Manual Tuning from the SETUP
1
menu and press OK.
Enter the multiplex number using the number
2
buttons or use
then press
television will automatically search for that
multiplex.
When the multiplex is found any channels not
currently on the channel list will be added and
the channel information at the top of the screen
will be updated.
Repeat as necessary. Press EXIT to finish.
3
Manual Tuning for DVB-C
When Ant/Cable In is set to Cable, DTV Manual
Tuning will display the following information:
Frequency – a specific frequency can be input for
scanning.
Modulation – select from five QAM modulation options.
Symbol Rate – A specific baud rate (KS/s) can be input
for manual scanning.
14
Manual Tuning
is known.
or
to adjust the number and
z
x
to select Start Scan, press OK. The
e
Hide quick links:
Advertisement
Table of Contents
