HANNspree HO165HTB User Manual page 13

ASPECT RATIO
SHARPNESS
VIDEO MODE
RESPONSE TIME
OSD SETTING
LANGUAGE
H-POSITION
V-POSITION
TRANSPARENCY
OSD TIME-OUT
OSD COLOR
SYSTEM
AUDIO INPUT
When the aspect ratio of screen is distorted, you may
make adjustments by using this function. 「FULL」 indicates
full screen display, which does not ensure the image is
shown as is or in initial scale. 「FIT」indicates scaling by
the proportion of original images, which may cause the
screen showing black bands.
function depends upon the selected model]
Select the 「 SHARPNESS」 option to adjust the sharpness of
the display. Set the value from -2 to 2.
Choose「VIDEO MODE」or 「PC MODE」for video
transmission. While using HDMI or HDMI to DP ports
for video transmission, the video will appear cut off
slightly around the edge; choose「PC MODE」to view
videos with complete image.
Setup the display response time through the Response
time function. Available settings are MINIMUM,
INTERMEDIATE, and MAXIMUM.
limited to specific models only.]
Select 「LANGUAGE」 option to change the language of
the OSD. Enter the option and select a language.
[Reference only, the OSD Language depends on the
selected model]
Select 「H-POSITION」option to adjust the horizontal
position of the OSD. Enter the option and adjust the level.
Select 「V-POSITION」option to adjust the vertical
position of the OSD. Enter the option and adjust the level.
Select 「TRANSPARENCY」option to adjust the
transparency of the OSD. Enter the option and adjust the
level.
Select 「OSD TIME-OUT」 option to set the OSD time out
from 10 to 100 seconds. Enter the.
To choose the color combination of the OSD window,
select 「OSD COLOR」option under 「OSD SETTING」
menu, choose modes 1/2/3.
While transferring via the HDMI port, it is recommended
13
[The availability of this
(For HDMI/DP Input only)
[This feature is
User's Manual