Analogue Channel Fine Tune; Clean Channel List; Common Interface; Reset Tv - Toshiba 32CV711B Owner's Manual

CONTROLS AND FEATURES

Analogue Channel Fine Tune

When the reception is poor, you can use this
function to do the fine tuning.
In the SETUP menu, press ▼ to highlight
Channels and press ► or
Press ▼ to highlight Analogue Channel
Fine Tune and press
Highlight and press
channel.
4
Press ◄ or ► to adjust the frequency.
Press ◄ to decrease and ► to increase
the frequency.
Analogue Channel Fine Tune
1 BBC 1
2 RTP1
3 -----
4 -----
5 -----
6 -----
7 -----
8 -----
9 -----
10 -----
OK Adjust

Clean Channel List

This feature cleans all the TV channels whilst
your channel list is not empty.
In the SETUP menu, press ▼ to highlight
Channels and press ► or
Press ▼ to highlight Clean Channel List
and press ► or
Channels
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channel Edit
Clean Channel List
Enter
OK
The Clean Channel List screen appears.
Press to clean now.
Previous settings will be lost ! Press Cancel for no
change. Press OK to continue.
OK
to enter.
to enter.
to select the
175.25 MHz
687.25 MHz
55.85 MHz
209.25 MHz
223.2 MHz
572.3 MHz
590.25 MHz
623.25 MHz
759.2 MHz
772.2 MHz
Select RETURN Back EXIT Exit
to enter.
to enter.
Select Back Exit
RETURN EXIT
Cancel

Common Interface

This function enables you to watch some pay
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
Press MENU and press ◄ or ► to select
APPLICATIONS.
Press ▼ to highlight Common Interface
and press ► or
Press to select the CI card to view the
Module information.

Reset TV

Selecting Reset TV will reset all TV settings to
their original factory values, excludes Country,
OSD Language, and Channels.
In the SETUP menu, press ▼ to highlight
Reset TV and press ► or
Select OK to confirm or select Cancel to
exit.

Automatic Power Down

The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not touch
the control buttons on the remote control or on
the TV control panel.
In the SETUP menu, press ▼ to highlight
Automatic Power Down.
Press ◄ or ► to select On or Off.
24
.
to enter.