Digital Manual Tuning, Analogue Fine Tuning; Digital Manual Tuning; Analogue Manual Tuning; Analogue Fine Tune - Toshiba 32BV801B User Manual

Digital Manual Tuning, Analogue Fine Tuning

The television can be tuned-in manually using Manual Search feature.

Digital Manual Tuning

The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
• Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
• Repeat as necessary.
Note: Press SOURCE button to switch between TV/
DTV.

Analogue Manual Tuning

The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded fi lm into the media recorder
and press PLAY, then manually tune.
• While in TV source, press
or Right button select Install menu.
• Using the Down button select Program and key
in the programme position to be tuned with the
number buttons, we suggest Programme 0 for a
media recorder.
32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 21 32&40BV801B_MB38_[GB]_(IB_INTERNET)_DVB-T2_(3910UK)_10073217_10073218.indd 21
MENU and using the Left
English - 21 -
• Use the Down button to select Search then press
the Left or Right button to search. The television will
begin searching for channels.
• Each signal will show on the television, if it is not
your media recorder press the Left or Right button
to restart the search.
• When your media recorder signal is found, save
the selection by pressing the Down button until
Store is highlighted, then press the Left/Right or
OK button to save.
• Repeat for each programme position to be tuned
then press BACK to fi nish.
Note: Press SOURCE button to select between TV
or DTV.

Analogue Fine Tune

• Select Fine Tune from the Installation menu by using
Up or Down button.
• Use Left or Right button to set Fine Tune. When
fi nished, select store and press OK button.
03.10.2011 18:53:05 03.10.2011 18:53:05