Epson DM-D110 User Manual page 4

English
for TM-T88V-DT/TM-T88VI-DT2
All of the illustrations are at the beginning of this manual. They are identified by letters (A, B . . .). Some of
the illustrations have numbers in them. See the list below for the meaning of the numbers.
Illustration A:
1. DIP switch
(rear side of the display)
2. DM-D110
3. Screen
4. L-shaped pole
5. Base
6. USB Cable
Cautions
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the
information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson
Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages
resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or
abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)
failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options
or any consumable products other than those designated as Original Epson Products or Epson Approved
Products by Seiko Epson Corporation.
Depending on the area, the interface cable may be included with the product. If so, use that cable.
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that
occurs from the use of any interface cables other than those designated as Epson approved products. For details
about approved cables, contact Epson customer support.
EPSON is a registered trademark of Seiko Epson Corporation.
Exceed Your Vision is a registered trademark or trademark of Seiko Epson Corporation.
All other trademarks are the property of their respective owners and used for identification purpose only.
NOTICE:
The contents of this manual are subject to change without notice.
©Seiko Epson Corporation 2015-2019. All rights reserved.
When this product is used for applications requiring high reliability/safety, such as transportation devices related
to aviation, rail, marine, automotive, etc.; disaster prevention devices; various safety devices, etc.; or functional/
precision devices, etc.; you should use this product only after giving consideration to including fail-safes and
redundancies into your design to maintain safety and total system reliability. Because this product was not
intended for use in applications requiring extremely high reliability/safety, such as aerospace equipment, main
communication equipment, nuclear power control equipment, or medical equipment related to direct medical
care, etc., please make your own judgment on this product's suitability after a full evaluation.
USB Interface
User's Manual
Illustrations
7. Straight pole
Illustration B
8. L-shaped pole model
9. Tilt angle (display): max. 48°
10. Horizontal rotation angle:
(display) max. 300°
11. (L-shaped pole) max. 270°
Restriction of Use
Illustration C
12. Straight pole model
13. Tilt angle (display): max. 48°
14. Horizontal rotation angle:
(display) max. 300°
Illustration D
15. DIP switch
16. DIP switch cover