Advertisement
THERMA-FUSER
MAINTENANCE
The moving parts of the TF Therma-Fuser diffuser have no maintenance or lubrication requirements. We are often asked to
recommend periodic maintenance procedures and a spare parts stock. Recommended maintenance is to clean the outer surfaces
of the Therma-Fuser diffuser—nothing else. We do not recommend stocking any spare parts. Our customers also confirm that
stocking is unnecessary.
Damper Blade Adjustment (TF-C, TF-CW, AND TF-HC)
If one of the blades does not track uniformly with the others, make a simple field adjustment to the spoke wire which connects
the blade to the control plate. A pair of needle nose pliers or similar tool is all that is required. If the blade does not open as rapidly
as the other blades, insert the pliers inside of the closed loope in the spoke wire and slightly expand the loop. If the blade opens
more rapidly than the others, place the pliers outside of the closed loop and slightly compress the loop. No other adjustment is
required.
7
acutherm.com | THERMA-FUSER - Manual
Advertisement
