Autoposition; H Position; Position; Dot Clock - Toshiba 22BV500B Owner's Manual

PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus.

Autoposition

If you shift the picture horizontally or vertically to an unwanted
position, use this item to put the picture into correct place
automatically.
• Select the PC POSITION option from the main menu. PC
Position menu appears on the screen:
• Press the Down button to highlight Autoposition and then
press the OK button.

H Position

H (Horizontal) Position shifts the image horizontally to right
hand side or left hand side of the screen.
• In the PC POSITION menu press the Down button until H
Position is highlighted.
• Press the Left or Right button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards the
top or bottom of the screen.
In the PC POSITION menu press the Down button until V
Position is highlighted.
Press the Left or Right button to adjust the value.

Dot Clock

Dot Clock adjustment corrects interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
• In the PC POSITION menu press the Down button until
Dot Clock is highlighted.
• Press the Left or Right button to adjust the value.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_22740W_(IB_INTERNET)_10068436.indd 26 00_MB45_[GB]_3910UK_IDTV_NICKEL9_22740W_(IB_INTERNET)_10068436.indd 26
PC Mode
Please see the previous sections.
Depending on the resolution and scan frequency that you
input to the TV Set, you may see a hazy or noisy picture on
the screen. In such a case you can use this item to get a clear
picture by trial and error method.
• In the PC POSITION menu press the Down button until
Phase is highlighted.
• Press the
Dot Clock adjustments correct the interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
• In the PC POSITION menu press the Down button until
Dot Clock is highlighted.
Press the Left or Right button to adjust the value.
Contrast, Brightness and Colour Temperature adjustments
in this menu are identical to adjustments defi ned in TV
picture menu.
When Colour Temp is Manual, you can also adjust the R, G,
B items. R, G and B adjust the TV image colour in PC RGB
mode. You can change the TV colour to your desired colour:
R (Red), G (Green), B (Blue)
Select Reset and press OK button to reset the adjustments
to factory default settings.
Note:
For switching to PC source, press SOURCE button on your
remote control and select PC input. You can also use Source
menu to switch to PC mode.
Note that PC mode menu settings are available only while
the TV is in PC source.
English - 26 -

Phase

Left or Right button to adjust the value.
Dot Clock

PC Picture controls

17.05.2010 16:53:44 17.05.2010 16:53:44