Confi Guring Pc Picture Settings; Pc Picture Settings (*); Pc Position; Autoposition - Toshiba 32DV504B Owner's Manual

Confi guring PC Picture Settings

PC Picture Settings (*)

(*) While in VGA/PC mode, some items in Picture
menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in VGA/
PC mode.
PC Picture controls
Contrast, Brightness and Colour Temperature
adjustments in this menu are identical to adjustments
defi ned in TV picture menu.
Select Reset and press OK button to reset the
adjustments.
Note:
For switching to VGA/PC source, press
button on your remote control and select VGA/PC
input.
Note that VGA/PC mode menu settings are available
only while the TV is in PC source.

PC Position

Select this to display PC position menu items.

Autoposition

If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
• Select the PC Position option from the main menu.
Press OK to display the PC Position submenu.
• Press the Down button to highlight Autoposition
and then press the OK button.

H Position

H (Horizontal) Position shifts the image horizontally to
right hand side or left hand side of the screen.
• In the PC Position menu press the Down button
until H Position is highlighted.
• Press the Left or Right button to adjust the value.
00_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(32145LED_1910UK)_NICKEL17_10075896_10076140.indd 30 00_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(32145LED_1910UK)_NICKEL17_10075896_10076140.indd 30
V (Vertical) Position shifts the image vertically towards
the top or bottom of the screen.
In the PC Position menu press the Down button until
V Position is highlighted.
Press the Left or Right button to adjust the value.
Dot Clock adjustment corrects the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
• In the PC Position menu press the Down button
SOURCE
until Dot Clock is highlighted.
• Press the Left or Right button to adjust the value.
Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
• In the PC Position menu press the Down button
until Phase is highlighted.
• Press the Left or Right button to adjust the value.
English - 30 -
V Position

Dot Clock

Phase

26.11.2011 11:45:01 26.11.2011 11:45:01