Audio Description (Optional); Standby Search (*); Viewing Main Menu; Selecting Programme Positions - Toshiba 19BV500B Owner's Manual

Digital Settings
Confi guration

Audio Description (optional)

Audio description refers to an additional narration track for
blind and visually impaired viewers of visual media, including
television and movies. The description narrator talks through
the presentation, describing what is happening on the screen
during the natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this feature, only
if the broadcaster supports that additional narration track.
• In the configuration menu, highlight
pressing Up or Down buttons and press OK.
• Use Up or Down buttons to select an item. Then use Left
or Right buttons to set.
Audio Description: This function enables or disables the
audio description feature.
Preferred Language: You can defi ne a preferred language
by using this setting. This setting can be used only when it
is available.
Relative Volume: Using this option, the Audio Description
volume level can be increased or decreased relatively,
according to the general volume.

Standby Search (*)

(*) This setting is visible only when the Country option is set
to Denmark, Sweden, Norway or Finland.
If the Standby Search is set to On, when the TV is in
standby mode, the TV will look for any changes in the saved
channels.
• Use Up or Down button to select Standby Search and then
press Left or Right button to set this setting as On or Off.
• If you change Standby Search to Off, this function will be
unavailable. To use Standby search please make sure that
you select Standby Search as On.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 18 00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 18
Some of the main controls of your TV are as the following.
continued
• Press "
time to view main menu.
• Press
menu.
To select a programme position use the numbered buttons
Audio Description by
on the remote control. Programme positions can also be
selected using P+ and P- .
Press INFO to display the on-screen information i.e.
programme position, stereo/mono signal and picture format.
To revert to the previous programme position press
(SWAP).
Use the Input Selection window if the television does not
switch over to a connected source automatically.
• Press SOURCE button on your remote control for directly
changing sources. Or select Source option from the main
menu by using Left or Right button. Use then Up or
Down button to highlight an input and press Right button
to select.
Note: You can mark desired source options by pressing the
OK button. Therefore, when SOURCE button is pressed,
only the marked source options will be available (except for
the TV source).
English - 18 -
General Controls

Viewing Main Menu

"/ " " buttons on the TV at the same
MENU button on the remote control to view main

Selecting Programme Positions

Input Selection

17.05.2010 16:43:25 17.05.2010 16:43:25