Aps (Automatic Programming System); Sorting Programme Positions - Analogue - Toshiba 19BV500B Owner's Manual

Analogue APS and Programme Sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the

APS (Automatic Programming System)

When the APS feature is selected all channels and settings
will be lost, the television will return to factory settings and
then re-tune.
• Press MENU and using the Left or Right button select
Program Table tab.
• The Program screen will appear on the screen. Press the
BLUE button to start APS.
• Press the Left or Right button to set the country.
• Press the BLUE button to cancel APS or the RED or OK
button to start.
00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 12 00_MB45_[GB]_3910UK_IDTV_NICKEL9_19740W_(IB_INTERNET)_10068435.indd 12
aerial is connected to your television.
You must allow the television to complete the search.
• When the search is complete the television will automatically
select programme position 1. This may not be a clear
picture or the signal may be weak, so the station order
can be changed using program table which will appear
on the screen.
• Press BACK to fi nish.

Sorting Programme Positions - Analogue

• Channels may be moved and saved to the position of
your choice.
• Select Programme Table tab from the main analogue TV
menu.
• With the list of channels showing, use navigation buttons
to highlight the channel you want to move and press
GREEN button. The selected channel will be highlighted
with a frame.
• Use navigation buttons move through the list to your
preferred position. As you do so, the other channels will
move to make room.
• When fi nished, press
English - 12 -
GREEN button to save your move.
17.05.2010 16:43:24 17.05.2010 16:43:24