Questions And Answers - Toshiba 23DL934B Owner's Manual

Questions and Answers

Q
Why is there no sound or picture?
Check the TV is not in standby mode.
A
Check the mains plug and all mains connections.
Q
Why is there a picture but no sound?
Check the volume has not been turned down or
A
that sound mute has not been selected.
Q
What can cause a poor picture?
Interference or a weak signal. Try a different TV
A
station.
Q
Why doesn't the video/DVD being played show
on screen?
Make sure the VCR or DVD player is connected to
A
the TV as illustrated in the beginning chapters, then
select the correct input by pressing
Q
Why is the VCR/DVD picture in black and white?
Check the correct input has been chosen. Check the correct input has been chosen.
A A
Q
Why is there a good video picture but no sound?
Check the SCART lead connection.
A
Q
Why doesn't the remote control work?
Check the batteries aren't dead or inserted
A
incorrectly.
Q
Why doesn't the TV OSD settings saved?
Ensure to turn off the power first before attempting
A
to unplug the AC cord. Otherwise, the settings may
not be saved.
01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_woypbpr_(23155LED_1911UK)_NICKEL17_10077816_10077346.indd 46 01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_woypbpr_(23155LED_1911UK)_NICKEL17_10077816_10077346.indd 46
Questions
and
.
English - 46 -
Answers
Q
Why don't the controls of the TV work?
Check that CHILD LOCK is not selected.
A
Q
Why is the sound only coming from one speaker
when stereo sound is selected?
Check that the balance in the SOUND menu hasn't
A
been set to one side.
Q
Why are there problems with analogue text
service?
Good performance of the analogue text depends
A
on a good strong broadcast signal. This normally
requires a roof or loft aerial. If the text is
unreadable or garbled, check the aerial. Go to the
main index page of the analogue text service and
look for the User Guide.
Q
What is DVB-T?
Digital Video Broadcast via an aerial/antenna.
A
Q
How are radio channels selected?
You can select them via the Channel List. You can select them via the Channel List.
A A
Q
What can be done if the PIN number has been
forgotten?
Incase of password is forgotten, Please press
A
1,2,7,6 or 4,7,2,5 buttons from remote control
respectively in order to enter parental setting
menu. Define a new pin number in Set PIN section.
You will need to enter your new PIN a second time
for verification purposes.
Q
Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?
The Phase may need adjustment. Select PC
A
Settings and highlight Phase and adjust until the
picture is clear.
05.05.2012 19:10:52 05.05.2012 19:10:52