Setting Up Your Tv; Startup Application; Quick Setup - Toshiba 40RL858B Owner's Manual

Startup Application

Before switching on the TV, make sure your
decoder/media recorder, if applicable, is in
standby. To set up the television, use the buttons
on the remote control as detailed on page 7.

Quick Setup

a
1
Press the button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b
B b C c
Press to select the menu language and
press OK.
c
Highlight Country and press
television is now set to tune the stations for your
country.
Quick Setup
Country
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d
Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
e
C c
Press or to select Home or Store. For normal
home use, select Home.
f
Press OK, and the AutoView screen will appear. Press
C c
or to select Yes or No.
AutoView
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
C c
or to select. The
English
English
English
English
English
Home
No
g
Press OK. If the Ant/Cable In screen appears, press
b
or to select Antenna or Cable and press OK to
check ( ).
h
Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.
i
B b
Press or to highlight Start Scan and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
Auto Tuning
Progress
DTV Tune 3%
ATV Tune
When the search is complete, the television will
automatically select channel one.
The Auto Tuning screen will display the total number
of services found.
NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
C c
Press or to select the one you prefer.
j
C c
Press or to view the DTV (digital channel) or ATV
(analogue channel) lists.
k
B b
Press or to move through the list to select a
channel and press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
PLEASE NOTE
The Quick Setup menu can also be accessed at any
time from the SETUP menu.
13

SETTING UP YOUR TV

Ant/Cable In
Antenna
Cable
Next
C
Waiting...
Channel: C7
B
c
or to
Found
2