Installation; Prior To Connecting; After Connecting - Whirlpool JT 366 SL Instructions For Use Manual

PRIOR TO CONNECTING

C
HECK THAT THE VOLTAGE
plate corresponds to the voltage in your
home.
D
O NOT REMOVE THE MICROWAVE INLET PROTECTION
located on the side of
PLATES
the oven cavity wall. They
prevent grease & food parti-
cles from entering the mi-
crowave inlet channels.
P ,
LACE THE OVEN ON A STABLE
that is strong enough to hold
FACE
the oven and the food uten-
sils you put in it. Use care
when handling.
T to be placed or
HIS OVEN IS NOT INTENDED
used on a working surface lower than 850 mm
above the fl oor.

AFTER CONNECTING

W is first plugged in or after a
HEN THE APPLIANCE
power failure, the display is blank. If required,
the oven can display a 24-hour digital Clock.
When the Clock function is not programmed
the display will remain blank until the cooking
time or the Timer is set.
T
HE OVEN CAN BE OPERATED ONLY
fi rmly closed.
P
OOR TELEVISION RECEPTION
and radio interference may
result if the oven is located
close to a TV, radio or aerial.
2

INSTALLATION

on the rating
-
EVEN SUR
if the oven door is
The manufacturers are not liable for any
problems caused by the user's failure to ob-
serve these instructions.
GB
P
OSITION THE OVEN AT A DISTANCE
ing sources. For suffi cient ventilation there
must be a space of at least 20 cm above the
oven. Ensure that the space underneath, above
and around the oven is empty to allow for
proper airfl ow. The microwave oven shall not
be placed in a cabinet.
E
NSURE THAT THE APPLIANCE IS NOT DAMAGED
that the oven door closes fi rmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
D
O NOT OPERATE THIS APPLIANCE
damaged mains cord or plug, if it is not
working properly, or if it has been dam-
aged or dropped. Do not immerse the
mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical
shock, fi re or other hazards may result.
T
HE EARTHING OF THIS APPLIANCE
ry. The manufacturer will accept no re-
sponsibility for injury to persons, ani-
mals or damage to objects arising from
the non-observance of this requirement.
from other heat-
. Check
if it has a
is compulso-