LG LSG4513ST Owner's Manual page 57

Problem
• Knobs melt
• Oven or racks are
stained after using
aluminum foil
• Flame or power is
weak
• Surface is not level
• Oven is tipping
• Oven shows error
code (F9, F19) but
cooktop burners are
working.
Cause
Improper usage
Aluminum foil has melted in the oven
Gas pressure may be weak
1. Range not leveled
2. Anti-tip device not installed correctly
Screw must
Level both sides of range
enter wood or
concrete
Approximately
0.65"
(16.5 mm)
2
1
The regulator valve is closed.
Lever's open
position
Anti-tip bracket
Wall plate
Use carpenter's level to
check level.
Lever's closed
position
WARRANTY
Prevention
• Do not leave door at stop
position during Broil/Bake
mode or right after cooking.
• Never cover the oven bottom
or cover an entire rack with
materials such as aluminum
foil.
• If the foil has already melted
onto the oven, it will not
affect the performance of the
oven.
• Check with gas supplier first
• Check with installer first
• Check with installer first
57