Satco NUVO S8031 Installation And Safety Instructions

24' & 48' REMOTE CONTROLLED
LED STRING LIGHT SETS
Model: S8031, S8033
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.

PACKAGE CONTENTS

• 24ft, 12 socket (S8031) or 48ft, 15 socket (S8033) heavy duty string lights.
• 12 or 15 LED bulbs (1-Watt LED S14 E26 included).
WARNING – SAFETY INFORMATION
• Never use with an extension cord unless the plug can be fully inserted.
Do not alter the plug.
• To reduce the risk of electric shock, do not use the product if power
cord is frayed or broken.
• Always unplug this product before replacing bulbs.
• Do not overload. Each string light set is rated for wattage and number of
sets connectible end-to-end. Please see chart for maximum wattage per
set and number of sets of the same type that can be connected end-to-end.
• Risk of Fire: Do not use bulbs having a wattage greater than the maximum
value stated on the product.
• If replacing bulbs, contact Satco customer service at Satco.com/support.
• For indoor and outdoor use.
• To reduce the likelihood of excessive heat and possible damage, use only
decorative LED lamps packaged with this product.
• Always unplug this product before installing or replacing
fuse and/or lamps.
• This is an electric product – not a toy! To avoid risk of fire,
burns, personal injury and electric shock, it should not be
played with or placed where small children can reach it.

INSTALLATION

NOTE: DO NOT DRAPE CORD. KEEP AWAY FROM CHILDREN.
Before beginning installation of product, make sure all parts
are present. If any part is missing or damaged, do not attempt
to install the product. No tools are required for installation.
1. Carefully unpack string lights from box.
2. Straighten string lights, eliminating any kinks before using.
3. Each string light is designed with a universal keyhole for mounting with lights hanging
downward. Hardware options (not included) screws, nails, zip ties, hooks and more.
4. Before plugging power cord of lights into a wall outlet, make sure each light bulb is
securely fastened. To ensure the lamp, socket, and rubber gasket make a water
tight seal, screw the lamp in secure enough for all components to make contact.
If a bulb does not light when energized, apply another half turn until it does.
DANGER: If using this light in a wet or damp location, connect this product to a Ground Fault
Circuit Interrupting (GFCI) outlet to reduce the risk of personal injury, electrical shock or death.
If If one is not provided, contact a qualified electrician for proper installation.

INSTALLING MULTIPLE STRING LIGHT SETS

NOTE: Always unplug string light from outlet before connecting additional string lights.
Extend the length of your lights by connecting more than one strand together (maximum 3 sets) to form one continuous string (S8031 72ft,
S8033 144ft). When connecting additional sets, the plug and controller must be removed from the additional set being added. Simply
follow the above installation steps making sure each connection between strands is secured and the end female receptacle is securely
covered using the receptacle cover when done.
Connection Jack
CARE AND MAINTENANCE: Clean only with a dry, soft cloth. Do not use abrasive cleaners.
Problem: Light does not come on initially or no longer comes on.
Possible Causes: Bulb is burned out. Power is OFF. Lamp is not plugged in.
Corrective Actions: Replace bulb. Make sure power supply in ON. Plug lamp into outlet.
© Copyright 2023 Satco Products, Inc. 5/23 v1.3
S8031
S8033
Model #
S8031
S8033
Female Male
Before Connecting
Maximum Maximum
Wattage/Set Connectable/Sets
12W Up to 72 ft (3 Sets)
15W Up to 144 ft (3 Sets)
Female Male
After Connecting
Satco Products, Inc.
Brentwood, NY 11717