Axis Q6055 User Manual page 39

AXIS Q6055 PTZ Dome Network Camera
Detectors
See the online help
Object Counter
Object Counter is used to count objects that move across a virtual line. Do the following to set the detector:
Note
Use the Drawing Opacity slidebar to define how transparent the area of interest or object size shape should be. Note
that this change will not be saved.
1. Choose Area of interest from the drop-down list and set the virtual line. Objects crossing this virtual line will be counted.
Important
When configuring Object size the view shall be zoomed out to Wide position.
2. Choose Object size from the drop-down list. Set the size limits of the object that should be detected. The camera will
detect any object whose size falls in between the minimum (blue shape) and maximum (white shape) range.
3. Use the Sensitivity slidebar to define how sensitive the detection should be. The lower sensitivity selected on the
Sensitivity bar, the greater difference in luminance is needed between the object and the background for the detector to
be activated.
See the online help
Observations
The Observations element appears when a preset is selected in the drop-down list.
Left to Right - The value shows the amount of objects detected moving from left to right or, if the virtual line is horizontal,
objects detected moving downwards.
Right to Left - The value shows the amount of objects detected moving from right to left or, if the virtual line is horizontal, objects
detected moving upwards.
Total - The value shows the total amount of objects crossing the virtual line in any direction.
Refresh - Click Refresh to get updated observation values. The values are not automatically updated.
Reset - Click Reset to reset the observation values.
for more information.
for more information.
39