Bundling The Connecting Cables - Sony BRAVIA KDL-40Z5100 Reference Book

Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications
Getting Started > Installing the TV > Bundling the Connecting Cables

Bundling the Connecting Cables

Use the attached cable clamper to bundle the connecting cables. The cable clamper is located on the
Table-Top Stand as illustrated.
Do not bundle the AC power cord with other connecting cables. This can affect the picture quality.
When using a Wall-Mount Bracket, your connected cables can be clamped to an alternate location. Follow
the steps below.
1) Remove the cable clamper from the Table-Top Stand using a Phillips screwdriver (not supplied).
2) Make sure that the tip of the plastic fastener you removed is closed as shown in (2).
3) Locate the alternate hole to attach the cable clamper on the TV rear cover as shown in (3). Push the
fastener into the hole.
4) Bundle the cables and close the clamper.
Back to When Installing the TV Against a Wall or Enclosed Area Next to Securing the TV (Page 1 of 3)
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.