Table of Contents
Advertisement
Opening and closing the bonnet
Fig. 63 Bonnet release lever/release lever
Fig. 64 Securing the bonnet
First read and observe the introductory information and safety warn-
ings
on page 84.
Opening
Before opening the bonnet, ensure that the arms of the windscreen wipers are
correctly in place against the windscreen otherwise the paintwork could be dam-
aged.
›
Open the driver door.
›
Pull the release lever under the dash panel in the direction of the arrow
» fig.
63.
1
›
Press the release lever in the direction of the arrow
is unlocked.
›
Grab hold of the bonnet and lift.
86
General Maintenance
›
Take the bonnet support out of its holder in direction of arrow
secure the opened bonnet by inserting the end of the support in the opening
designed for it.
Closing
›
Lift the bonnet slightly and unhook the bonnet support. Insert the bonnet sup-
port into the holder
›
Let the bonnet drop into the lock carrier lock from a height of around 20 cm – do
not push it in!
Check that the bonnet is closed properly.
Never open the bonnet using the locking lever
Engine compartment overview
Fig. 65 Principle sketch: Engine compartment
» fig. 63
and the bonnet
2
1
2
3
» fig. 64
designed to hold it.
3
WARNING
CAUTION
First read and observe the introductory information and safety warn-
ings
on page 84.
Coolant expansion reservoir
» page 90
Windscreen washer fluid reservoir
» page 87
Brake fluid reservoir
» page 91
» fig. 64
and
3
4
» fig.
63.
Advertisement
Chapters
Table of Contents
