Table of Contents
Advertisement
Menu
Item
SPDIF Selection
HDMI1 / 2 / 3
Input
Reset to Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
to Default
Off Timer
Child Lock
Channel List
Edit
Auto Tuning
Manual
Tuning
26
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal (Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For Video mode (p. 40)
Select to fit the input signal (Digital / Analogue) (p. 62).
Digital
: HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
●
HDMI input mode only
Press the OK button to reset the present settings of Mode, Balance,
Headphone Volume, and Surround in Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
On Green : by green signal from your PC
Press the OK button to reset the present PC Setup settings to the default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Locks a channel / AV input to prevent access to it (p. 33)
Skips the unwanted channels or edits channels (p. 30)
Sets all TV channels automatically (p. 30)
Sets the TV channels manually (p. 30)
●
Set to the minimum level if noise occurs
Advertisement
Table of Contents
