Sony BRAVIA KDL-22BX300 Operating Instructions Manual page 52

Condition
Poor picture
Picture quality not as good
as viewed at the store
Broadcast HD formats have
poor quality
Double images or ghosts
Only snow and noise appear
on the screen
Dotted lines or stripes
No color / Dark picture /
Color is not correct / The
picture is too bright
Noisy picture
Blurry picture / Poor color
No sound / Noisy sound
No sound but good picture
Audio noise
No audio or low audio with
Home Theater System
No color / Irregular picture
52
Explanation/Solution
• Picture quality depends on the signal content. See Quick Setup Guide
(supplied) to display the best possible picture for that signal.
• Content and signal quality are controlled by the signal provider. Many
HD channels and content are actually upscaled versions of standard-
definition broadcasts. The picture is affected by the quality of the signal
received, which varies between channel and program.
• Check cable/antenna connections.
• Check the antenna location and direction.
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its serviceable life. (3-5 years
in normal use, 1-2 years at the seaside.)
• Keep the TV away from noise sources such as cars, motorcycles, or hair-
dryers.
• If using 300 ohm twin lead, move the excess lead away from the TV or
try using 75-ohm coaxial cable instead.
• Adjust the Picture Mode options in the Picture settings (see page 27).
• If you set the Power Saving mode to Low or High, it will enhance the
black level.
• Make sure that the antenna is connected using a 75-ohm coaxial cable
(not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged antenna cable.
• Transporting the TV from a cold to a warm location or a sudden change
in room temperature may cause moisture condensation, resulting in a
blurry picture or poor color. Turn off your TV and wait a few hours
before powering on again.
• Check the volume control.
• Press MUTING or VOL + so that "Muting" disappears from the screen (page
21).
• Set Speakers to TV Speakers in the Sound settings (see page 30). If
it is set to Audio System, sound is not output from the TV's speakers
regardless of the TV's volume control.
• When using HDMI input with Super Audio CD or DVD-Audio,
DIGITAL AUDIO OUT (OPTICAL) may not provide an audio signal.
• When tuned to a digital channel with Alternate Audio, the broadcaster
may not be broadcasting your preferred Alternate Audio language.
Press TOOLS, highlight and select Alternate Audio, and change the
Alternate Audio language (see page 30).
• Make sure that the antenna is connected using a 75-ohm coaxial cable
(not supplied).
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged antenna cable.
• Press THEATER for BRAVIA Sync activated Theater System (see page
23).
• Set Speakers to Audio System in the Sound settings (see page 30).
• Verify that the Video/Component 1 Selection (page 38) is set to the
current input type in use. We suggest leaving this setting to Auto.