Locating Inputs And Outputs - Sony BRAVIA KDL-22BX300 Operating Instructions Manual

Locating Inputs and Outputs

Rear Panel
Item
1 DIGITAL AUDIO
OUT (OPTICAL)
2 CABLE/
ANTENNA
3 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L
4 VIDEO IN/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
R-AUDIO-L
(MONO)
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
1 2 3
1
COMPONENT IN
CABLE/ (1080p/1080i/
ANTENNA
720p/480p/480i)
2
DIGITAL
AUDIO OUT
PC IN
PC/HDMI 1
(OPTICAL)
1
2
Description
Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
Digital compatible.
RF input that connects to your Cable or VHF/UHF antenna.
Component video provides better picture quality than the composite video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
This input port can be used as a composite video input (VIDEO) or as a component
video input (COMPONENT 1). For composite use, connect the yellow jack to Y for
video and use audio L (mono) and R for audio signal. For component connection,
use Y, P , P for video signals and also connect the audio L (mono) and R for audio
B R
signal.
This TV can auto detect and switch between the VIDEO and COMPONENT 1
when VIDEO or COMPONENT 1 is connected.
To set to auto detection, press MENU, then select the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
4 5
AUDIO VIDEO IN
R L ( MONO )
P P
Y
AUDIO R B
R L
AUDIO RGB
AUDIO IN
AUDIO
AUDIO
OUT
(FIX)
R L
SERVICE
ONLY
IN
6 7 8
(Continued) 7