Sony BRAVIA KDL-22BX300 Operating Instructions Manual page 16

2
Secure the TV to the stand.
Use the optional hardware listed below (not supplied):
• M4 × 16 mm anchor bolt (screwed into the TV's Table-Top Stand).
• A screw or similar (attach it to the TV stand).
• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no
excess slack in the rope or chain.
An alternative way to secure the TV is with an optional Sony Support Belt Kit.
• Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV
model name.
For United States call: 1-800-488-7669 or visit: www.sony.com/accessories
For Canada call: 1-877-899-7669
• If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.
3
Anchor the TV to the wall.
Anchor the TV to the wall by using bolts, wall anchor and chain (or rope).
~
• Securing the TV to the stand without securing the TV and the stand to the wall provides
minimum protection against the TV toppling over. For further protection, be sure to follow
the three measures recommended
Anchor bolts
(not supplied)
16
Anchor bolt
(not supplied)
Wall-mount
holes
Rope or chain
(not supplied)
Screw hole on the
Table-Top Stand
Screw (not supplied)
Wall-anchor
(not supplied)