Recognizing And Repairing Of Mistakes; Notes On Product Liability; Notes On Disposal; Eu Declaration Of Conformity - Profi-pumpe WASSERFALL Operating Instructions Manual

8 English

10. RECOGNIZING AND REPAIRING OF MISTAKES

Problem Possible cause
No electricity
Pump does not
start
Defective pump
Hose connections systems have a leak
Pump runs but
Pump could have a leak
no water is en-
couraged
Coarsening or fountain nozzles dirty

11. NOTES ON PRODUCT LIABILITY

We point out, that we are only liable for damages under the Product Liability Act, which are caused
by our units if no changes were made to the equipment. If repairs are carried out by our authorized
service, we are only liable if original spare parts and accessories were used.

12. NOTES ON DISPOSAL

Electro devices of our company, labeled with the symbol of the crossed trash bin, are not
permitted to be disposed in your household garbage. We are registered at the German
registration department EAR under the WEEE-No. DE79535656.
This symbol means, that you're not allowed to treat this product as a regular household
waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!
In connection with the sale of batteries or with the delivery of equipment containing
rechargeable battery packs, the seller is obliged to draw your attention to the following:
You are obliged to return used batteries as an end-user. You can return batteries af-
ter use to the seller or to the designated collection facilities, which are free of charge
(eg: municipal collection points or in stores). You can return the batteries for disposal
at no charge to the seller.

13. EU DECLARATION OF CONFORMITY

The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the product
named overleaf, namely "WASSERFALL" as placed on the market, complies with the relevant
provisions listed below, the relevant EU harmonised directives and the EU standard for safety.
This declaration of conformity applies insofar as no modifications are made to the product. The
sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents:
Amur S.à r.l. - 36, Rue de la Gare - L-5540 Remich
Solution
Check electrical connections
Replace pump
Check hose connection systems
Check pump for moisture damage
Disassemble and clean the tube
and the fountain nozzle