Table of Contents
Advertisement
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The childproof lock and the timer can also be set
Note:
when the appliance is switched off. Certain displays and
notes, such as those relating to the residual heat in the
cooking compartment, remain visible on the display
after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Press the ÿ On/Off button to switch on the appliance.
All touch fields light up red. The Bosch logo appears on
the display, and then the first heating type in the
selection list.
In the basic settings, you can specify which
Note:
operating mode should appear after the appliance is
switched on. ~ "Basic settings" on page 22
Switching off the appliance
Press the ÿ On/Off button to switch off the appliance.
Any functions that may be running are cancelled.
The time, or if applicable, the residual heat indicator,
appears on the display.
In the basic settings, you can set whether the
Note:
clock should be displayed when the appliance is
switched off. ~ "Basic settings" on page 22
Starting the operation
You must press the l Start/Stop button to start each
operation.
After starting the appliance, the time display is shown
on the display along with the settings. The display ring
and the heating line also appear.
Pausing the operation
You can also interrupt and then continue an operation
using the l Start/Stop button.
If you press and hold the l Start/Stop button for
approx. 3 seconds, the operation is cancelled and all
settings are reset.
The fan may continue to run after an operation
Note:
has been paused or cancelled.
Selecting an operating mode
Once the appliance is switched on, the default
operating mode is displayed. You can start this setting
immediately using the l Start/Stop button.
If you want to select a different operating mode, you
can find detailed descriptions of these modes in the
relevant chapters.
The following always applies:
Touch the appropriate field.
1.
The symbol lights up red.
Turn the rotary selector to change the highlighted
2.
selection.
If necessary, apply other settings.
3.
To do this, touch the appropriate field and change
the value using the rotary selector.
Press the l Start/Stop button to start.
4.
The appliance starts the operation.
Setting the type of heating and temperature
If the "Types of heating" operating mode has not been
selected, touch the ! field. The symbol lights up red
and the first type of heating appears in the display with
a default temperature.
Example in the picture: Hot air eco . at 195 °C.
Turn the rotary selector to set the type of heating.
1.
Touch the } field.
2.
The temperature is highlighted in white in the
display.
Turn the rotary selector to set the temperature.
3.
Press the l Start/Stop button to start.
4.
The time in the display shows how long the
operation has already been running.
Operating the appliance
en
15
Advertisement
Table of Contents
