Dismantling Of The Dryer - Beko DRYPOINT XCe 80 Installation And Operating Manual

11.

DISMANTLING OF THE DRYER

If the dryer is to be dismantled and disposed of then it must be split into groups of materials of construction.
Part
Desiccant material
Frame and supports
Piping
Towers and screens
Valves
Filter housing
Filter cartridge
Solenoid valve
Condensate Drain
Silencers
Safety Valves
Gaskets and O-Ring
Electric cables
Electric Parts
We recommend complying with the safety rules and regulations for the disposal of each type of
material. The adsorption material and the filter cartridge will contain droplets of lubrication oil. Do not
dispose of these materials in the environment. All local Governmental laws and regulations must be
followed in disposing of the above listed materials.
DRYPOINT® XC Series Heatless Regenerated Dryers: IOM10003
Material
Activated alumina, Oil contaminated
Carbon steel, Powder coated
Galvanized steel, Galvanized malleable iron, Brass, Aluminum
Carbon steel, Stainless steel
Brass, Stainless steel, Bronze, Plastic
Aluminum, Epoxy paint
Filtering material, PVC, Oil
Bronze, Steel, Techno-polymer, PVC
PVC, Aluminum, Steel, Bronze
Aluminum, Stainless steel
Brass, Bronze
Graphite, Synthetic elastomer
Copper, PVC
PVC, Copper, Bronze, Silicon
(Rev.I)
28