Maintenance And Service Intervals; Fuses - Beko DRYPOINT XCe 80 Installation And Operating Manual

8.2 Maintenance and Service Intervals

Preventative maintenance of the pre- and post-filter element, and desiccant material is required.
The controller monitors the dryers operating hours and will activate the maintenance alarms after the following intervals:
+ 360 Days: Amber Service Light
+ 400 Days: Red Service Light
The dryer system should be check for items that require standard replacement and maintenance such as: the filter
elements, exhaust silencers, and desiccant material.
NOTE: The maintenance alarms (reminders) do not change the operation of the controller in any way.

8.3 Fuses

One safety fuse is fitted on the electronic board, in positions F1. The fuse protects all circuits the electronic board of the
BEKOMINI controller. The replacement fuse type is:
+ T1A type Radial lead fuse, PCB style
The fuse can break if there are any problems with the dryer. In which case, only a certified technician can
replace the fuse, but only after solving the problem that caused the malfunction first. Refer to Section 9,
'TROUBLESHOOTING GUIDE'.
DRYPOINT® XC Series Heatless Regenerated Dryers: IOM10003
(Rev.I)
20