Page 1
Exchange DC inrush filter RBS5000 Part instruction Rev. 1.2...
Page 2
Der tages forbehold for trykfejl og ændringer Dantherm can accept no responsibility for possible errors and changes Irrtümer und Änderungen vorbehalten Dantherm n’assume aucune responsabilité pour erreurs et modifications éventuelles...
Page 3
How to replace the inrush DC filter in RBS5000 When to replace Dantherm Air Handling recommend replacing the inrush DC filter only when broken. Part number A new inrush DC filter can be ordered under part number: 028084 Ericsson no. NTM 201 3383. (upgrade kit), or 028079 Ericsson no.
Page 4
How to replace the inrush DC filter in RBS5000, continued Procedure, remove Follow this procedure to remove the old inrush DC filter: the filter Step Action Disconnect the AC/DC plugs and the communication plug on front of the unit Dismount the front panel by unscrewing the 9 torx 25 screws Remove the internal fan...
Page 5
How to replace the inrush DC filter in RBS5000, continued Procedure, remove Step Action the filter, continued Remove the voltage selec- tor by following these steps: Pull up the mounting guard Pull back the voltage selector and leave it in the unit ...
Page 7
+(0) 121 133 70 infodk@dantherm.com dantherm.no@dantherm.com infose@dantherm.com www.dantherm.com www.dantherm.no www.dantherm.se Dantherm Air Handling (Suzhou) Ltd. Dantherm Limited Dantherm Air Handling Inc. Bldg#9, No.855 Zhu Jiang Rd., 12 Windmill Business Park 110 Corporate Drive, Suite K Suzhou New District, Jiangsu Windmill Road, Clevedon...