Auto Cook Function - Morphy Richards EG820C2LP-PM Installation & User's Instructions

Auto cook function

1. The oven has a pre-programmed cooking menu that can be used
immediately from start up just by pressing the relevant pad.
2. After checking the cooking method used in the table following, place
the food to be cooked in a suitable container and cover when
necessary.
3. Open the door and place the container in the centre of the glass
turntable and securely close the oven door.
4. Press the auto-cooking programme of choice (see table on next page)
and press the pad repeatedly until the corresponding food weight /
quantity is displayed and press the START/+30SEC pad.
For MEAT menu, three-preset programmes are available and these are
accessed by pressing the MEAT pad repeatedly to scroll though the
options available below.
Press
x 1
x 2
x 3
•
Press the MEAT pad repeatedly to select the cooking mode of choice
(see above) and then press the START/+30SEC pad to confirm.
•
Press the MEAT pad again to select the weight to be cooked and then
press the START/+30SEC pad to confirm.
5. The oven will start to cook and the timer will start to count down from
the preset time.
6. Cooking can be interrupted to stir contents or check cooking progress
by opening the door. Settings will be retained and cooking will restart
when the door is closed and the START/+30SEC pad is pressed.
7. After the cooking time has finished,
8. Allow food to stand for 30 seconds to one minute before stirring or
serving.
Version 2 31/03/2021
Function Display
Chicken CHIC
Beef bEEF
Pork P0
five
bleeps will sound.
19