TP-Link VX230v Install Manual page 15

TP-Link VX230v Install Guide
Once the TP-Link HX220 is connected and you click "Finish" you will see the new HX220 showing connected
under the Topology.
Note: Please leave the HX220 in place and powered on, for at least 2-3mins until the LED stops flashing blue
and goes to a solid white. Once the TP-Link HX220 has a white LED, you can power if off and re-locate it. It
must stay in range of the TP-Link VX230 to maintain the Mesh Network
InfiNET Broadband Pty Ltd
Level 15, Corporate Centre One, 2 Corporate Court, Bundall, QLD, 4217 – Ph: 1300 101 414