Picture And Text Mode; Fm Radio Mode; Record Mode - Cowon D2 User Manual

Basic Operations
14

5. Picture and Text Mode

1
2
3
4
Open images and text files by touching the screen
1
Images should be placed in PICTURE folder, text files in TEXT folder
Please refer to the list of supported file types for images and texts.
Closes the settings screen
2
3 Applies the currently selected image as the background on screen
Displays the image files in the selected folder in slideshow
4
Moves the cursor up.
5
Opens the currently selected folder or file
6
Moves up in a folder level.
7
Moves the cursor down.
8

6. FM Radio Mode

1 2
3 3
Checks status of stereo or mono signals
1
2 Displays the country for radio signals, which can be changed under Settings mode.
Press it briefly to change the tuning frequency at 0.1MHz intervals. Press it and hold it to searches and
3
jumps to the next tuning frequency with good signals.
In preset mode, it changes to either previous preset channel or the next preset channel.
Closes the settings screen
4
Selects the Preset mode. In this mode, only the preset channels can be accessed.
5
Automatically searches the FM frequencies with good signals and enters them into the preset channels
6
Sets stereo or mono setting
7
Displays the preset search mode. You can add the currently tuned frequency to the preset channel or
8
delete a preset channel.
Sets the quality of the recording radio signals. Higher bps provides better sound quality but requires larger file size.
9
Records the currently selected channel
10
- D2 does not have a dedicated antenna. Instead the headphone wire is used to enhance radio signal
strengths like an antenna. Stretching out the headphone wire will improve signal reception quality. During
Radio recording, be sure to use the headphone to optimize sound quality.
COWON D2
1 5
6
7
8
4
5
4
6
7 9
8
10

7. Record Mode

1 2
3
4
5
Line-In record
※ Line-in Cable, Line-in Cable Converter (Optional)
Plays back recorded files
1
Starts recording
2
Closes the setting screen
3
Records voice
4
Records through a Line-In connection
5
Selects the sound quality of the recording. Higher bps provides better sound quality but requires
6
larger file size.
Sets the volume level during recording.
7
Sets use of external microphone. Only stereo pin microphone should be used. (This setting can be
8
selected on in Voice Record mode)
Sets the duration for silent intervals before it creates a new file for recording. It automatically detects
9
the silent intervals in incoming sound and creates a new file when the silent interval exceeds the
specified duration. (*This setting can be selected only in Line-In Record mode)
Basic Operations
3
6
7
8
9
Rec via external microphone
※ Line-in Cable Converter (Optional)
15
COWON D2