Advertisement
Step 1
å
Assemble your unit on a carpeted floor or on the empty carton to
avoid scratching your unit or the floor.
å
To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (7F)
into the large holes in the ENDS (A and B). Repeat this step for
the BOTTOMS (F, G, and R) and UPRIGHTS (L and M).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
(20 used)
www.sauder.com/service
7F
A
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
B
422984
2
STOP
If you purchased
the 422983 Hutch,
assemble that unit
first.
Page 5
Advertisement
