Table of Contents
Advertisement
To display the DVD Menu
r
When you play a DVD which contains several
menus, you can select the menu you want by using
MENU.
1. Press MENU on the remote control.
The disc's menu appears.
2. Select the menu by using w/s/a/d.
3. Press ENTERb to confirm.
To display the DVD title
r
When you play a DVD which contains several titles,
you can select the title you want by using the
TITLE.
1. Press TITLE on the remote control.
The disc's title appears.
2. Select the menu by pressing w/s/a/d.
3. Press ENTERb to confirm.
Selecting a subtitle language
yr
During playback, press S-TITLE on the remote
control repeatedly to select a desired subtitle
language.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures
and to listen to the sound quicker than to play at a
normal speed.
1. During playback, press MONO/STEREOz on
the remote control or D(PLAY) on the unit to
play at 1.5 times speed. "dX1.5" will appear on
the screen.
2. Press MONO/STEREOz on the remote
control or D(PLAY) on the unit again to exit.
DM5420K-FU.AUKRLLK_5068-ENG.indd 27
Starting play from selected
time
y
To start playing at any chosen time on the file or
title,
1. Press DISPLAY on the remote control during
playback.
2. Press w/s to select the time clock icon and
"--:--:--" appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter "11020" by using
numerical buttons.
4. Press ENTERb to confirm. Playback starts from
the selected time.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Changing the character set to
display DivX® subtitle correctly
- optional
y
During playback, if the subtitle does not displayed
on the screen properly, press and hold S-TITLE on
the remote control for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly.
,
Note
If any button is not pressed for about
10 seconds, the language code display
disappears.
Operating
27
3
2012-07-12
12:03:07
Advertisement
Table of Contents
