Adjusting The Projected Image; Adjusting The Projection Angle - BenQ Portable Series User Manual

Adjusting the projected image

Adjusting the projection angle

The projector features a base that holds the projector and allows you to
adjust the projection angle.
Place the projector properly on the base until it clicks, and rotate the
projector to adjust the projection angle.
Note
• The maximum angle of adjustment is 135 degrees.
• If the screen and the projector are not perpendicular to each other, the projected image becomes
trapezoidal. To correct this, see
• When the projector is on, DO NOT place down the projector with its left or right vents facing down
as this will block the vents.
"Keystone" on page 34
33
for details.
1 3 5 °