Using The Speed Controls; Product Usage; Preparing The Dicing Kit For First Use - KitchenAid 5KFP1644 Owner's Manual

PRODUCT ASSEMBLY (CONTINUED)

USING THE SPEED CONTROLS

NOTE: If the Food Processor fails to operate, make sure the Work Bowl and lid are properly
locked on the base.
1.
To turn on, flip the speed lever to "2" (high) or "1" (low), then turn the dial to "I" (on).
2.
To stop, turn the dial to "O" (off).
3.
To pulse ( ), flip the speed lever to "2" (high), then turn the dial to PULSE (
processing; the dial will automatically go back to "O" (off) position to stop. The pulse
control ( ) allows precise control of the duration and frequency of processing.

PRODUCT USAGE

PREPARING THE DICING KIT FOR FIRST USE

IMPORTANT: Follow these directions in order to properly wash all parts of the Dicing Kit
before using it for the first time.
1. Using the handle, place the assembled Dicing Kit into the Work Bowl.
2.
When placing the Dicing Kit in the Work Bowl, line up the Dicing Kit's tab with the groove in
the Work Bowl.
3.
Rotate the Dicing Kit Lid, using the finger tabs until it unlocks.
4.
Using the handle, remove the Dicing Kit Lid from the Dicing Kit.
5.
Clean each part of the Dicing Kit with a soft cloth and warm water.
THE DICING KIT USAGE
1. Place the Disc Adapter onto the power shaft.
2.
Place the Dicing Kit Grid, with the grid facing front, and line up the kit's tab with the groove
in the Work Bowl.
3.
Place the Dicing Kit Blade, making sure it is securely seated.
4.
Place the Dicing Kit Lid onto the assembled kit with the hole facing front, and lock into
place.
5.
Place the lid on the Food Processor and use the medium Feed Tube to dice the desired
items.
6.
After dicing, remove the Dicing Kit Lid and the Dicing Kit Blade, and place the Dicing Kit
cleanout tool in the notches on the Dicing Kit Grid, then fold the cleanout tool over into the
dicing grid. This will push remaining food out of the grid, enabling you to wash the Dicing
Kit more efficiently.
6
) to start