Garland HT BEST 510 Instruction Manual page 12

English
2.3. USE AND CARE OF THE MACHINE
Only cut hedges. Do not use this machine for
other uses for which the machine has not been
designed to carry out. For example: do not use this
machine to cut plastic parts, bricks or construction
materials. Do not use this machine to move objects.
The usage of this machine for jobs other than those
for which the machine has been designed, could lead
to dangerous situations.
Use this machine, accessories and all its parts
according to the instruction manual and taking into
account working conditions and working area. The use
of this machine for jobs different to those specified
in the instruction manual can cause dangerous
situations.
Check that all security elements are in good working
order at all times.
Remember user is the responsible of danger and
accidents caused to other people or things. The
manufacturer will not be liable for damages caused
through the incorrect usage of the machine.
The sharp cutting tool is very dangerous. If instructions
are not followed it will result in serious injury.
Keep all parts of your body away from the cutting tool
during operation
Maintain the cutting elements sharp and clean. The
cutting elements if sharp and clean will cut better, do
a better job, have less chance of getting tangled and
easier to control.
If your machine accidentally takes a knock, inspect the
machine carefully. If the blade bends, the cover break
so if you see any other issue that could affect the
functioning of the machine, take the machine to your
nearest after sales service.
2.3.1. BACK PULL
When the blades contact with a solid object in the
critical zone a dangerous reaction can be produced.
This reaction is denominated backward movement. As
a result, the user could lose control of the hedgecutter
and serious or mortal injuries can be produced.
These forces occur due to an improper use of the
machine and/or because of the incorrect interpretation
of the instruction manual and can be avoided by
following these simple instructions:
1. There shouldn´t be any fences, posts, cables
or rocks near the blades to avoid the backward
movement, as well as possible damages to the
blades.
2. When using the hedgecutter hold it by the handle.
3. Do not lose visual contact with the hedgecutter.
If necessary, move the accelerator to slow motion
position.
4. When using the hedgecutter do not place it near
your feet or over your shoulder level.
12/52