During Playback (Multi-Audio) - Pioneer SDV-P7 Operation Manual

Table of Contents

Changing Audio Language during Playback (Multi-Audio)

DVDs can provide audio playback with different languages and different systems (Dolby

Digital, DTS etc.). With DVDs featuring multi-audio recordings, you can switch between lan-

guages/audio systems during playback.

TOP

AUDIO

RTN

S.TITLE

DISP

BSSM/

ANGLE

ch call

Press the AUDIO button while the audio selection mark is

displayed.

The audio changes each time you press the AUDIO button.

Note:

• This function only operates with DVDs featuring multi-audio recordings.

• The number in the "

guages/audio systems.

• With some DVDs, switching between languages/audio systems may only be possible using a

menu display.

• You can also switch between languages/audio systems using the SET UP MENU. For details,

refer to "Setting the Audio Language" on page 42.

• Only digital output of DTS audio is possible. If this product's optical digital outputs are not

connected, DTS audio will not be output, so select an audio setting other than DTS.

• While the audio selection mark is displayed, you can also switch to a desired audio language

number using the number buttons.

• Display indications such as "Dolby D" and "5.1ch" indicate the audio system recorded on the

DVD. Depending on the setting, playback may not be with the same audio system as that

indicated.

All manuals and user guides at all-guides.com

Press the AUDIO button during play-

POWER

back.

The audio selection mark (

DVD

BAND

" mark on a DVD's package indicates the number of recorded lan-

) is displayed for 8 seconds.

Table of Contents