Yamaha YZ125X 2023 Owner's Manual page 96

2. Install:
• Bearing race
• Upper bearing "1"
• Bearing race cover "2"
TIP
Apply the lithium-soap-based grease on the
bearing and bearing race cover lip.
3. Install:
• Lower bracket "1"
TIP
Apply the lithium-soap-based grease on the
bearing, the portion "a" and thread of the steer-
ing stem.
LS
a
4. Install:
• Steering ring nut "1"
Steering ring nut
7 N·m (0.7 kgf·m, 5.2 lb·ft)
TIP
Install the steering ring nut with its stepped side
"a" facing downward.
Tighten the steering ring nut with a steering
nut wrench "2".
Refer to "CHECKING AND ADJUSTING
THE STEERING HEAD" on page 3-17.
5. Check the steering stem by turning this lock
6. Install:
LS LS
1
7. Install:
TIP
• Temporarily tighten the lower bracket pinch
• Do not tighten the upper bracket pinch bolts
4-26
STEERING HEAD
to lock. If there is any binding, remove the
steering stem and check the steering bear-
ing.
• Washer "1"
• Front fork "1"
• Upper bracket "2"
bolts.
yet.